XHS4ZC56

Product parameter description:

(1) The total displacement is the displacement of the hydraulic motor multiplied by the reduction transmission ratio.

Total displacement=displacement of hydraulic motor x reduction transmission ratio

(2) The rated torque is the actual output torque after considering the transmission efficiency when the system pressure is 16MPa or 20MPa.

Rated torque is calculated when system pressure is 16MPa or 20MPa. It equals to actual output torque and depends on transmission efficiency

(3) The transmission efficiency includes the mechanical efficiency of the hydraulic motor and the mechanical efficiency of the planetary reducer.

Transmission efficiency includes the mechanical efficiency of hydraulic motor and the mechanical efficiency of planetary reducer.

Product selection example:

XHSC3-1000CD31H means that the hydraulic transmission device is driven by a single-stage planetary reducer, the gearbox modulus is 3, the total displacement is 1000ml/rev, the output shaft is connected by thread, the hydraulic motor distributor is D31, and the rated pressure level is 20MPa.

XHSC3-1000C D31H means:The hydraulic transmission device is transmitted through single stage planetary reducer Modulus of gearbox is 3 Total displacement is 1000ml/rev Output shaft adopts screwed connection Oil distributor model of hydraulic30 MPa motor is Dure31

Product selection instructions:

(1), XHSC hydraulic transmission allows working under high pressure.

(2) The maximum allowable pressure of the shell is 0.8MPa, if you have special requirements, please contact the manufacturer.

(3) Hydraulic oil: It is recommended to use high-quality, anti-foam, anti-oxidation mineral-based hydraulic oil. The ideal working oil temperature is 30°C~50°C, and the allowable oil temperature is -20°C~80°C. When the oil temperature is lower than 10°C , must use low-condensation hydraulic oil. The viscosity of the hydraulic oil is 40-60 centistokes, and the allowable value is 5-300 centistokes.

(4) The filter precision of hydraulic oil is recommended to be 25um or higher.

(5) The hydraulic transmission device can rotate in both directions, and the specific steering is shown in the attached drawing. If the user's requirement is opposite to that shown in the illustration, please specify when ordering.

(6) Positioning of oil drain pipe: XHSC transmission allows installation in any direction. In order to ensure the lubrication of each movement pair in the motor, it is required to fill the motor with hydraulic oil before working. Hydraulic oil.

(7) Selection of distributors: various hydraulic transmission devices can choose distributors of various specifications according to different working conditions. Consideration: Distributor installation: The direction of the inlet and outlet of the distributor is allowed to rotate at intervals of 72 degrees according to the shape of the installation connection position, but when the screw is loosened and rotated, be careful not to damage the sealing function of the flat O-ring.

Note: The XH hydraulic transmission device can be equipped with our company's XHM, XHS, XHGS, XHCA, XHBD and other motors according to the working conditions and service life to meet different customer needs.

Product model description:

要减少液压传动系统应用中小型液压行走马达时的压力能损失，首先要从里面逐渐，在减少系统软件内部结构压力损失的一起来减少输出功率损失。要处理这个问题，可以改善元器件内部结构过流道的压力损失，选用一体化电路和铸造流道。与此同时还要减少或清除操作系统的节流阀损失，尽可能减少非安全性必须的溢总流量，防止使用节流阀系统软件来控制总流量和压力。

在原材料的运用上，可以使用选用负压工艺制作的原材料和新式橡胶密封件，那样就可以合理的减少摩擦损失。在运用时的维护保养是不能少的，立即维护保养液压马达，避免环境污染对马达寿命和稳定性导致危害，务必发展趋势新的污染监测方式 ，对环境污染开展在线测量，要立即调节，不允许落后，以防因为处置不按时而导致损失。液压马达要减少压力能损失，必须液压马达生产厂家和顾客共同奋斗，那样才可以比较大程度的避免压力能损失。