XHS3ZC45

Product selection instructions:

(1), XHSC hydraulic transmission allows working under high pressure.

(2) The maximum allowable pressure of the shell is 0.8MPa, if you have special requirements, please contact the manufacturer.

(3) Hydraulic oil: It is recommended to use high-quality, anti-foam, anti-oxidation mineral-based hydraulic oil. The ideal working oil temperature is 30°C~50°C, and the allowable oil temperature is -20°C~80°C. When the oil temperature is lower than 10°C , must use low-condensation hydraulic oil. The viscosity of the hydraulic oil is 40-60 centistokes, and the allowable value is 5-300 centistokes.

(4) The filter precision of hydraulic oil is recommended to be 25um or higher.

(5) The hydraulic transmission device can rotate in both directions, and the specific steering is shown in the attached drawing. If the user's requirement is opposite to that shown in the illustration, please specify when ordering.

(6) Positioning of oil drain pipe: XHSC transmission allows installation in any direction. In order to ensure the lubrication of each movement pair in the motor, it is required to fill the motor with hydraulic oil before working. Hydraulic oil.

(7) Selection of distributors: various hydraulic transmission devices can choose distributors of various specifications according to different working conditions. Consideration: Distributor installation: The direction of the inlet and outlet of the distributor is allowed to rotate at intervals of 72 degrees according to the shape of the installation connection position, but when the screw is loosened and rotated, be careful not to damage the sealing function of the flat O-ring.

Note: The XH hydraulic transmission device can be equipped with our company's XHM, XHS, XHGS, XHCA, XHBD and other motors according to the working conditions and service life to meet different customer needs.

    液压传动系统的具体特点是其调整的方便性和合理布局的操作灵活性，与纯机械设备和液压传动相比。可依据工程机械设备的状态和工作状况的必须，把汽车发动机、主动轮、工作中组织等各构件各自布局在有效的部位，汽车发动机在任一生产调度转速比下工作中，传动系统都能激发出很大的驱动力，并且传动系统在很宽的輸出转速比范畴内仍能维持较高的高效率，并能便捷地得到各种各样提升的驱动力传动系统特点，以满足各种各样工作的负载情况。时速较高的走动机械设备中所采取的带闭式油道的走动液压机推动设备能无极变速，液压马达回转装置使车子温和发展、快速变速和无冲击性地转换行车方位。对在工作中需用经常启动和变速、常常穿越重生行车的车子而言这一特性十分宝贵。但与开启式回路相比，闭式回路的设计方案、设备调节及其维护保养都是有较高的困难和技术标准。