XHSJ5.5 tons

product description:

XHSJ series hydraulic winches are composed of various flow distributors with one-way balance valve and high-pressure shuttle valve for controlling brakes, XH series hydraulic motors, Z-type brakes, C-type gear reducers, reels, racks and other components (hydraulic principle See picture), the user only needs to equip the pump station and the reversing valve. Since the winch has its own valve group, it not only simplifies the hydraulic system but also improves the reliability of the transmission. The hydraulic valve group that comes with the XHSJ winch successfully solves the problems of empty hook vibration and secondary sliding during lifting in general winches, making the XHSJ hydraulic winch run smoothly during lifting and lowering. In addition, it also has the characteristics of high efficiency when starting and working, low energy consumption, low noise, beautiful appearance, compact size, and good economy. It can be applied to gravity crushing traction equipment, crawler and marine cranes, truck cranes, In equipment such as pipelayers, grab buckets and drilling rigs with crushing functions.

Product model example:

XHSJ6-120-315-30-ZPH said:

The modulus of the planetary reducer is 6, the tension of the first layer of the wire rope is 120KN, the rope capacity of the drum is 315m, the diameter of the wire rope is 30, a hydraulic winch with a brake and a one-way balance valve, and a pressure rating of 20MPa.

Product model description:

Product parameter description :

1. The total displacement of this series of winches is the amount of oil supplied per revolution of the drum.

2. The oil supply volume is the theoretical flow rate of the pump station, that is, the calculated value obtained by considering the system efficiency of 90%.

3. The rope capacity is the theoretical maximum rope capacity of the winch. The actual allowable effective rope capacity should consider keeping 3 turns of the wire rope for use to prevent the rope end from falling out.

    1、操纵电器故障

    操纵电器核心部件发生问题时，通常卷扬机3吨随着较大的出现异常噪声、针对这样的事情要多听多看看，不一样部位的故障造成的噪声是有差异的，要依据故障所属部位采用不一样的对策，在了解以后，辨别故障所属部位轻而易举。

    2、减速机故障

    如果是起重机 减速机一部分出了故障，要立即关机实际操作，查验电机是不是遵循了应用标准，应用前是不是按表明加上、及其立即改换润滑脂，或是滚动轴承损坏情况严重这些状况，要对症治疗，立即检修，降低偶然状况的产生。有时候一些小的故障通常会引起大的问题。

    3、电机故障

    起重机电机运作中发生响声时，应该马上终止实际操作，随后查验电机各部位是不是有破坏状况、是不是单相电运行、轴心移位等诸多状况都是造成有出现异常响声。查验商品时，要多听多看看，5吨卷扬机可以运用或依据故障响声特性，明确非标准大吨数起重机传出响声部位，找寻和维修故障。