Transmission device for XHSC330000 coiling equipment

Product selection instructions:

(1), XHSC hydraulic transmission allows working under high pressure.

(2), the maximum allowable pressure of the shell is 0.8MPa, if you have special requirements, please contact the manufacturer.

(3) Hydraulic oil: It is recommended to use high-quality, anti-foam, anti-oxidation mineral-based hydraulic oil. The ideal working oil temperature is 30°C~50°C, and the allowable oil temperature is - 20°C~80°C, when the oil temperature is lower than 10°C, low-condensation hydraulic oil must be used. The viscosity of the hydraulic oil is 40-60 centistokes, and the allowable value is 5-300 centistokes.

(4), the hydraulic oil filtration accuracy is recommended to be 25um or higher.

(5) The hydraulic transmission device can rotate in both directions, see the attached picture for the specific rotation. If the user's requirement is opposite to that shown in the illustration, please specify when ordering.

(6) Oil drain pipe positioning: XHSC transmission allows installation in any direction. In order to ensure the lubrication of each movement pair in the motor, it is required to fill the motor with hydraulic oil before work. The location of the drain port must be selected to ensure that the housing is filled with hydraulic oil during operation.

(7) Selection of distributors: various hydraulic transmission devices can choose distributors of various specifications according to different working conditions. The speed, flow rate, connection mode and the requirements of the integrated valve group should be considered; distributor installation: the direction of the inlet and outlet of the distributor is allowed to rotate at intervals of 72 degrees according to the shape of the connection position, but when the screw is loosened and rotated, be careful not to damage it The sealing function of the flat O-ring.

Note: The XH hydraulic transmission device can be equipped with our company's XHM, XHS, XHGS, XHCA, XHBD and other motors according to the working conditions and service life to meet different customer needs.

    1）公司输出功率的净重比较轻，即在导出一样输出功率的规范下，身型小、净重比较轻、惯性力矩小、结构紧凑、动态特点好。

    2）液压机能快捷的进行无级变速，并且调速范围大。

    3）液压传动装置机器设备工作上平稳、体现快、破坏性小，能快速运行、刹车系统和常常变速。

    4）液压传动装置机器设备的控制、调节比较简单。操纵比较方便快捷、省力，有利于进行自动化控制。马上、电、液互相配合运用时，易进行较复杂的自动式工作上循环。

    5）液压传动装置易获得蛮大的力和转矩，可以使传动系统结构简单。

    6）液压传动装置有利于进行过电压保护，此外，因采用齿轮油作为传动系统化学物质，相对运动表面正中间能独立润滑，故原件的使用寿命长。

    7）由于液压件顺利完成了标准化和产品化，因而液压传动装置的方案设计、生产加工和运用都比较方便快捷。液压件的排列合理布局也具有非常大的操纵性。液压机能快捷的进行无级变速，并且调速范围大。