XHS2ZC3

Product selection instructions:

(1), XHSC hydraulic transmission allows working under high pressure.

(2) The maximum allowable pressure of the shell is 0.8MPa, if you have special requirements, please contact the manufacturer.

(3) Hydraulic oil: It is recommended to use high-quality, anti-foam, anti-oxidation mineral-based hydraulic oil. The ideal working oil temperature is 30°C~50°C, and the allowable oil temperature is -20°C~80°C. When the oil temperature is lower than 10°C , must use low-condensation hydraulic oil. The viscosity of the hydraulic oil is 40-60 centistokes, and the allowable value is 5-300 centistokes.

(4) The filter precision of hydraulic oil is recommended to be 25um or higher.

(5) The hydraulic transmission device can rotate in both directions, and the specific steering is shown in the attached drawing. If the user's requirement is opposite to that shown in the illustration, please specify when ordering.

(6) Positioning of oil drain pipe: XHSC transmission allows installation in any direction. In order to ensure the lubrication of each movement pair in the motor, it is required to fill the motor with hydraulic oil before working. Hydraulic oil.

(7) Selection of distributors: various hydraulic transmission devices can choose distributors of various specifications according to different working conditions. Consideration: Distributor installation: The direction of the inlet and outlet of the distributor is allowed to rotate at intervals of 72 degrees according to the shape of the installation connection position, but when the screw is loosened and rotated, be careful not to damage the sealing function of the flat O-ring.

Note: The XH hydraulic transmission device can be equipped with our company's XHM, XHS, XHGS, XHCA, XHBD and other motors according to the working conditions and service life to meet different customer needs.

    与履带液压机挖掘机行走设备相较为，轮胎式行走设备的主要特点是：

    （1）规定路面整平，牢靠，以防轮辙过深，提升挖掘机行车摩擦阻力，转向摩擦阻力，小型吊机液压马达危害挖掘机的可靠性。

    挖掘机转向时由安裝在两根履带式上，各自由两部液压油泵供油的行走电机（用一台油泵供油时要选用专门的调压阀来控制）根据对油道的操纵，很便捷地完成转向或就地拐弯，以融入挖掘机在各种各样路面，场所上健身运动。

    （2）轮胎式挖掘机的行走速率一般不超过20km/h，爬坡性能为40%-60%。

    （3）为了更好地改进挖掘机的越野suv特性，宜选用全轮推动，煤矿液压马达悬架均衡晃动轴。工作时由液压机支脚支撑点，使前后左右桥卸压并整个机械可靠性得到提升。