XHJ10 ton winch

product description:

XHSJ seriesThe hydraulic winch is composed of various flow distributors with one-way balance valve and high-pressure shuttle valve to control the brake, XH series hydraulic motor, Z-type brake, C-type gear reducer, reel, frame and other components (the hydraulic principle is shown in the figure ), the user only needs to be equipped with a pump station and a reversing valve. Since the winch has its own valve group, it not only simplifies the hydraulic system but also improves the reliability of the transmission. The hydraulic valve group that comes with the XHSJ winch successfully solves the problems of empty hook vibration and secondary sliding during lifting in general winches, making the XHSJ hydraulic winch run smoothly during lifting and lowering. In addition, it also has the characteristics of high efficiency when starting and working, low energy consumption, low noise, beautiful appearance, compact size, and good economy. It can be applied to gravity crushing traction equipment, crawler and marine cranes, truck cranes, In equipment such as pipelayers, grab buckets and drilling rigs with crushing functions.

Product model example:

XHSJ6-120-315-30-ZPH said:

The modulus of the planetary reducer is 6, the tension of the first layer of the wire rope is 120KN, the rope capacity of the drum is 315m, the diameter of the wire rope is 30, a hydraulic winch with a brake and a one-way balance valve, and a pressure rating of 20MPa.

Product model description:

Product parameter description :

1. The total displacement of this series of winches is the amount of oil supplied per revolution of the drum.

2. The oil supply volume is the theoretical flow rate of the pump station, that is, the calculated value obtained by considering the system efficiency of 90%.

3. The rope capacity is the theoretical maximum rope capacity of the winch , and the actual allowable effective rope capacity should consider keeping 3 turns of the wire rope for use to prevent the rope end from falling out.

液压系统液压马达的部件由一个内齿圈和一个与之相配的齿轮或转子构成。内齿圈与外壳固定能接在一起，从油孔进到的油促进转子绕一个中心点公转。这类迟缓旋转的转子根据花键轴驱动输出变成液压马达。这类最初的摆线马达面世后，经过几十年演变，另一种概念的马达也逐渐产生。

这类马达在内置的齿圈中装上滚子，具备滚子的马达能提供较高的启动与运作扭矩，滚子降低了磨擦，因此提升了效率，即便在很低的转速下输出轴也能产生稳定的输出。液压系统生产厂家根据改变输入输出流量的方位使马达快速换向，并在两个方向产生等价值的扭矩。各系列的马达都有各种排量的选者，以适应各种速度与扭矩的需求。